·Some details are not shown. Please refer to specification sheets for all information.
R6-NP1
Remote I/O R6 Series
PROFIBUS-DP INTERFACE MODULE (for 62-point analog signals)
MODEL: R6-NP1[1]
ORDERING INFORMATION • Code number: R6-NP1[1] Specify a code from below for [1]. (e.g. R6-NP1/Q) • Specify the specification for option code /Q (e.g. /C01)
[1] OPTIONS blank: none /Q: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating
GENERAL SPECIFICATIONS Connection Network: 9-pin D-sub connector, female Internal bus: Via the Installation Base (model: R6x-BS) Power supply: Via the Installation Base (model: R6x-BS) Max. number of I/O modules: 31 (analog 62 points) Module address: 1 to 31 Isolation: PROFIBUS to internal bus or internal power RUN indicator: Bi-color (green/red) LED (refer to the instruction manual) ERR indicator: Bi-color (green/red) LED (refer to the instruction manual)
PROFIBUS COMMUNICATION Interface: PROFIBUS-DP, slave (RS-485 isolation) Station No. setting: Rotary switch; 00 - 7D (Station No. is 7D even setting greater value) Max. baud rate: 12 Mbps Protocol: DPV1 (The following functions are available.) Alarm function (Pull/Plug alarm, Status alarm); I&M function (I&M 0 through 3) Transmission cable: Approved for PROFIBUS-DP GSD file: Msys0C57.GSD Downloadable at M-System’s web site Input data: Max. 124 bytes Output data: Max. 124 bytes Total I/O data: Max. 248 bytes Diagnostics: Module-related, Status (device-related), Channel-related (max. 32 channels, maskable)
INSTALLATION Operating temperature: -10 to +55°C (14 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Atmosphere: No corrosive gas or heavy dust Mounting: Installation Base (model: R6x-BS) Weight: 100 g (3.53 oz)
PERFORMANCE Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 1500 V AC @1 minute (PROFIBUS to internal bus or internal power)
STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EN 50581